Dust Laptop Programme

"nbsp laptops

The previous instruction dealt with how to clean the laptop of the starting user with little knowledge of the various electronic components: all that was required was to remove the rear (lower) laptop and to take the necessary action to remove the dust.

Regrettably, this cannot always help to address the overheating problem, the symptoms of which are the removal of the laptop with increased load, the constant ventilation and others. In some cases, the simple removal of dust from the ventilation loins, the radiator ribs and other places available without the removal of components may not help. This time, our theme is clean. dust laptop♪ It is worth noting that I don't recommend that the new recruits take on this: better retrieve the computers in your town, the price of cleaning the laptop is usually not exposed.

Clearing and cleaning the laptop

So, our task is not only to clean the kuler of the laptop, but also to clean up other components from the dust, and to replace thermopaths. And that's what we need:

• Note to remove the laptop
• Compressed air balloon
• Thermopath
• Cold tissue without wax
• Isopropylic alcohol (100% without salt and oil addition) or denaturat
• Flue piece of plastic - e.g. unnecessary discount card
• Antistatic gloves or bracelets (not necessarily but recommended)

Step 1. Clearing the laptop

The first step, as in the previous case, will be the beginning of a laptop, namely the removal of the lower lid. If you don't know how to do this, you'll go to the article on the first way to clean the laptop.

Step 2. Radiator removal

Most modern laptops use one processor cooler radiator and videotape: metal tubes from them go to a fan radiator. Usually, there are a few shoes near the processor and the videotape, as well as in the refrigeration fan area that need to be removed. The refrigeration system, consisting of a radiator, heat pipes and a fan, should be separated, sometimes requiring efforts, as thermopath between the processor, the video card chip and the metal thermal conductor can act as a kind of cage. If it doesn't work, try moving the cooling system a little horizontal. Also, a good idea can be to start these actions immediately after any work has been done behind the laptop - warming up thermopaths.